Posts Tagged ‘transportation regulations’

YouTube Video Discusses Advantages of ISO Tanks to Transport Chemicals

Thursday, January 12th, 2012

Check out our first in a series of videos on important logistics topics of interest to chemical shippers.

Stephen Hamilton, Managing Director of ChemLogix Global, discusses how BulkTainer ISO tanks offer enhanced safety and security for shipping chemicals by taking chemicals off roadways and reducing the incidence of accidents. Click Here.

Did you know the Fuel Surcharge you pay on every load doesn’t cover the out-of -pocket costs of higher fuel cost to your carriers?

Thursday, March 24th, 2011

Why? Fuel surcharge formulas are based on a loaded mile formula. All empty miles run between the terminal and your loading site, such as miles from the carrier’s last delivery to you or miles to the terminal for equipment repairs or tank cleaning, are not included in the fuel surcharge calculation.  As a result, the carrier has added fuel costs for those empty miles. Sure, when you contracted with the carriers, they built in some fuel recovery number for empty miles.  However, recent fuel cost increases (the time from when you negotiated your contracts until now) are not included in those calculations.

What does this mean to you? Let’s review a few examples. Say, during the time of your last contract negotiation, fuel costs increased by $1.50/gallon.  What added cost does that represent?   The average truckload carrier – either dry van or bulk – wants a minimum per-truck revenue of $200K to $225K.   Assuming a modest 10% empty mile to loaded mile ratio for TL van freight and 20% for bulk freight, unrecovered fuel costs is $2,769 for dry van carriers and $5,538 for bulk truck carriers. (Click View Graph below for more)

How do you effectively negotiate during any price increase discussion? Know your carriers empty mile ratio and average truck miles per gallon before you meet. Also, look back at your current contract effective date. Knowing what the fuel price was during your last contract renewal, along with your carrier’s empty mile ratio and average MPG/truck, will enable you to calculate your fuel cost impact on your carriers. You can also be a good partner to your carriers by putting actions in place to minimize empty miles and fuel waste.   As example, initiate a no idle rule at your plant during wait time to load.


Welcome “Back to the Future” – Capacity Constraints Causing Load Coverage Problems

Thursday, June 17th, 2010

The exiting of drivers caused by the economic downturn is creating a driver shortage. Add the carrier cost escalations associated with compliance with the new federal regulations for tractors, trailers and communications and you have a recipe for reduced capacity and higher prices.

We are now seeing return of the “suppliers” market experienced in 2004 when a perfect storm caused by the then “New Hours of Service’ regulations, and rail and intermodal capacity reductions by the railroads resulted in skyrocketing demand for trucks and increased fright cost.

If you haven’t experienced any problems as of yet you will. How can you prepare for this new reduction in trucking capacity and minimize the impact of fright rate increases? You need to be proactive.

Planning for capacity constraints?

Your first step is to realize that you are in a competition for carrier resources with other companies operating in your markets. You therefore need to make your freight more attractive to carriers. Now is the time to identify and make changes in those areas that make your freight more desirable and most attractive to carriers.  Here are suggested areas of focus:

  • Pay on time. The fastest way to lose carrier support is to be a slow pay. If you have internal freight payment issues, work to resolve them or outsource freight pay.
  • Establish an effective freight bill exception resolution process with your carriers so that issues can be quickly addressed and not end up as multiple balance dues. Multiple handling of freight bills drives up your costs and those of the carrier.
  • Provide a minimum of two days lead time for pickups giving your carrier ample time to plan your freight into their schedule.
  • Be consistent and predictable. Last minute change orders and short lead time orders are the most difficult for a carrier to respond to and least likely to accept.
  • Don’t be known as “that shipper who routinely cancels and re-books orders”.
  • Loosen up pickup and delivery windows. In a tight freight market assigning specific pickup times with 30 minutes or less leeway makes your freight more difficult to manage and less attractive. Carriers need flexibility to maximize the use of resources and enable them to serve as many shippers as possible.
  • Don’t load trailers early in the day for next day deliveries of less than 250 miles from your origin. Doing so increases the trailer usage on the load and may limit the carrier’s ability to use the trailer on other more local delivery.
  •  If possible allow carriers to drop trailers for loading at the carrier’s convenience for longer haul loads. This will enable the carrier to use a local driver to load and spot the trailer for later pickup by a long haul or system driver.
  • Don’t attempt to capture capacity by loading trailers in advance and delaying deliveries. Tying up carrier trailers for protracted periods of time even when you pay trailer spotting charges still limits the revenue opportunity for the carrier and they may not want your business.  

Manage freight cost increases on a lane by lane basis

  • Before you agree to any price increases understand how your current freight rates stack up in the market. Don’t merely accept an across the board increase. Benchmark your freight rates to identify lanes that are in jeopardy for rate increases. Chances are not all of your rates will be subject to an increase. Use an outside company with significant market knowledge to assist you in determining how your rates compare to other shippers.  It is well worth the nominal cost you will pay for the service.
  • Get to know your core carrier lane densities so you can match your freight to their lanes with the most opportunities for reload and/or round trip potential. These lanes generally produce the lowest costs for the carrier and the most favorable rates for the shipper.

The capacity pendulum has already passed its apex….it’s time to be proactive with your carriers.